FULL LIST OF U.S. GOODS HIT BY NEW EU IMPORT TARIFFS

25% Additional Duty

1. Sweetcorn, uncooked or cooked by steaming or by boiling in water, frozen
2. Sweetcorn provisionally preserved, e.g. by sulphur dioxide gas, in brine, in sulphur water or in other preservative solutions, but unsuitable in that state for immediate consumption
3. Dried, shelled kidney beans "Phaseolus vulgaris", whether or not skinned or split (excl. for sowing)
4. Maize (excl. seed for sowing)
5. Semi-milled round grain rice, parboiled
6. Semi-milled medium grain rice, parboiled
7. Semi-milled long grain rice, length-width ratio > 2 but < 3, parboiled
8. Semi-milled long grain rice, length-width ratio >= 3, parboiled
9. Semi-milled round grain rice (excl. parboiled)
10. Semi-milled medium grain rice (excl. parboiled)
11. Semi-milled long grain rice, length-width ratio > 2 but < 3 (excl. parboiled)
12. Semi-milled long grain rice, length-width ratio >= 3 (excl. parboiled)
13. Wholly milled round grain rice, parboiled, whether or not polished or glazed
14. Wholly milled medium grain rice, parboiled, whether or not polished or glazed
15. Wholly milled long grain rice, length-width ratio > 2 but < 3, parboiled, whether or not polished or glazed
16. Wholly milled long grain rice, length-width ratio >= 3, parboiled, whether or not polished or glazed
17. Wholly milled round grain rice, whether or not polished or glazed (excl. parboiled)  Wholly milled medium grain rice, whether or not polished or glazed (excl. parboiled)
18. Wholly milled long grain rice, length-width > 2 but < 3, whether or not polished or glazed (excl. parboiled)
19. Wholly milled long grain rice, length-width ratio >= 3, whether or not polished or glazed (excl. parboiled)
20. Broken rice
21. Prepared foods obtained by swelling or roasting cereals or cereal products based on rice
22. Rice, pre-cooked or otherwise prepared, n.e.s. (excl. flour, groats and meal, food preparations obtained by swelling or roasting or from unroasted cereal flakes or from mixtures of unroasted cereal flakes and roasted cereal flakes or swelled cereals)
23. Sweetcorn "Zea Mays var. Saccharata", prepared or preserved by vinegar or acetic acid
24. Sweetcorn "Zea Mays var. Zaccharata", prepared or preserved otherwise than by vinegar or acetic acid, frozen
25. Sweetcorn "Zea Mays var. Saccharata", prepared or preserved otherwise than by vinegar or acetic acid (excl. frozen)
26. Peanut butter
27. Orange juice, unfermented, Brix value <= 20 at 20°C, whether or not containing added sugar or other sweetening matter (excl. containing spirit and frozen)  
28. Orange juice, unfermented, Brix value > 67 at 20°C, value of <= 30 € per 100 kg, whether or not containing added sugar or other sweetening matter (excl. containing spirit and frozen)
29. Orange juice, unfermented, Brix value > 67 at 20°C, value of > 30 € per 100 kg, whether or not containing added sugar or other sweetening matter (excl. containing spirit and frozen)
30. Orange juice, unfermented, Brix value > 20 but <= 67 at 20°C, value of <= 30 € per 100 kg, containing > 30% added sugar (excl. containing spirit and frozen)
31. Orange juice, unfermented, Brix value > 20 but <= 67 at 20°C, whether or not containing added sugar or other sweetening matter (excl. containing spirit and frozen, with a value of <= 30 € per 100 kg and with > 30% added sugar)
32. Cranberry "Vaccinium macrocarpon, Vaccinium oxycoccos, Vaccinium vitisidaea" juice, unfermented, whether or not containing added sugar or other sweetening matter, Brix value > 67 at 20°C, value of <= € 30 per 100 kg (excl. containing spirit)
33. Cranberry "Vaccinium macrocarpon, Vaccinium oxycoccos, Vaccinium vitisidaea" juice, unfermented, whether or not containing added sugar or other sweetening matter, Brix value > 67 at 20°C, value of > € 30 per 100 kg (excl. containing spirit)
34. Cranberry "Vaccinium macrocarpon, Vaccinium oxycoccos, Vaccinium vitisidaea" juice, unfermented, Brix value <= 67 at 20°C, value of > € 30 per 100 kg, containing added sugar (excl. containing spirit)
35. Cranberry "Vaccinium macrocarpon, Vaccinium oxycoccos, Vaccinium vitisidaea" juice, unfermented, Brix value <= 67 at 20°C, value of <= € 30 per 100 kg, containing <= 30% added sugar (excl. containing spirit)
36. Juice of fruit of the species Vaccinium macrocarpon, unfermented, Brix value <= 67 at 20°C (excl. containing added sugar or spirit)
37. Cranberry "Vaccinium oxycoccos, Vaccinium vitis-idaea" juice, unfermented, Brix value <= 67 at 20°C (excl. containing spirit or added sugar)
38. Bourbon whiskey, in containers holding <= 2 l 25% 22083019 Bourbon whiskey, in containers holding > 2 l
39. Whisky, in containers holding <= 2 l (other than Bourbon whiskey and Scotch whisky)
40. Whisky, in containers holding > 2 l (other than Bourbon whiskey and Scotch whisky)
41. Cigars, cheroots and cigarillos containing tobacco
42. Cigarettes, containing tobacco and cloves
43. Cigarettes, containing tobacco (excl. containing cloves)
44. Cigars, cheroots, cigarillos and cigarettes consisting wholly of tobacco substitutes  
45. Water-pipe tobacco (excl. tobacco-free.)
46. Smoking tobacco, whether or not containing tobacco substitutes in any proportion, in immediate packings of a net content of <= 500 g (excl. waterpipe tobacco containing tobacco)
47. Smoking tobacco, whether or not containing tobacco substitutes in any proportion, in immediate packings of a net content of > 500 g (excl. water-pipe tobacco containing tobacco)
48. Tobacco, "homogenised" or "reconstituted" from finely-chopped tobacco leaves, tobacco refuse or tobacco dust
49. Chewing tobacco and snuff
50. Manufactured tobacco and tobacco substitutes, and tobacco powder, tobacco extracts and essences (excl. chewing tobacco, snuff, cigars, cheroots, cigarillos and cigarettes, smoking tobacco whether or not containing tobacco substitutes in any proportion, "homogenised" or "reconstituted" tobacco, nicotine extracted from the tobacco plant and insecticides manufactured from tobacco extracts and essences)
51. Eye make-up preparations
52. Manicure or pedicure preparations
53. Make-up or skin care powders, incl. baby powders, whether or not compressed (excl. medicaments)
54. T-shirts, singlets and other vests of cotton, knitted or crocheted
55. T-shirts, singlets and other vests of wool or fine animal hair or man-made fibres, knitted or crocheted
56. T-shirts, singlets and other vests of textile materials, knitted or crocheted (excl. of wool, fine animal hair, cotton or man-made fibres)
57. Men's or boys' trousers and breeches of cotton denim (excl. knitted or crocheted, industrial and occupational, bib and brace overalls and underpants)
58. Men's or boys' shorts of cotton (excl. knitted or crocheted, swimwear and underpants)
59. Men's or boys' trousers and breeches of synthetic fibres, industrial and occupational (excl. knitted or crocheted and bib and brace overalls)
60. Women's or girls' cotton denim trousers and breeches (excl. industrial and occupational, bib and brace overalls and panties)
61. Women's or girls' cotton shorts (excl. knitted or crocheted, panties and swimwear)
62. Bedlinen of cotton (excl. printed, knitted or crocheted)
63. Men's footwear with outer soles and uppers of leather, with in-soles of >= 24 cm in length (excl. covering the ankle, incorporating a protective metal toecap, made on a base or platform of wood, without in-soles, with a vamp or upper made of straps, indoor footwear, sports footwear, and orthopaedic footwear)
64. Tinplate of iron or non-alloy steel, of a width of >= 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than surface-treated
65. Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hotrolled or cold-rolled "cold-reduced", plated or coated with tin, of a thickness of < 0,5 mm (excl. tinplate)
66. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight >= 2,5 nickel
67. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight < 2,5 nickel
68. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5 nickel
69. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5 nickel
70. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5% nickel
71. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5% nickel
72. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickel
73. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickel
74. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight >= 2,5% nickel
75. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight < 2,5% nickel
76. Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm, containing by weight < 2,5% nickel
77. Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickel
78. Bars and rods of stainless steel, not further worked than cold-formed or coldfinished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickel
79. Bars and rods of stainless steel, not further worked than cold-formed or coldfinished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickel
80. Bars and rods of stainless steel, not further worked than cold-formed or coldfinished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickel
81. Bars and rods of stainless steel, not further worked than cold-formed or coldfinished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section)
82. Bars and rods of stainless steel, not further worked than cold-formed or coldfinished, containing by weight < 2,5% nickel (excl. such products of circular cross-section)
83. Angles, shapes and sections of stainless steel, only hot-rolled, only hot-drawn or only extruded
84. Angles, shapes and sections of stainless steel, not further worked than coldformed or cold-finished
85. Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.
86. Wire of stainless steel, in coils, containing by weight 28% to 31% nickel and 20% to 22% chromium (excl. bars and rods)
87. Wire of stainless steel, in coils, containing by weight >= 2,5% nickel (excl. such products containing 28% to 31% nickel and 20% to 22% chromium, and bars and rods)
88. Wire of stainless steel, in coils, containing by weight < 2,5% nickel, 13% to 25% chromium and 3,5% to 6% aluminium (excl. bars and rods)
89. Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of highspeed steel or silicon-electrical steel)
90. Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
91. Bars and rods of steel containing by weight 0,9 to 1,15% of carbon and 0,5 to 2% of chromium, and, if present, <= 0,5% of molybdenum, only hot-rolled, hot-drawn or hot-extruded, of a circular cross-section of a diameter of >= 80 mm (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
92. Bars and rods of steel containing by weight 0,9 to 1,15% of carbon and 0,5 to 2% of chromium, and, if present, <= 0,5% of molybdenum, only hot-rolled, only hot-drawn or hot-extruded (other than of circular cross-section, of a diameter of >= 80 mm and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
93. Bars and rods of alloy steel other than stainless steel, only hot-rolled, hotdrawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
94. Bars and rods or alloy steel other than stainless steel, only hot-rolled, hotdrawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
95. Bars and rods of alloy steel other than stainless steel, of rectangular "other than square" cross-section, hot-rolled on four faces (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
96. Bars and rods of alloy steel other than stainless steel, only hot-rolled, hotdrawn or hot-extruded, of other than rectangular [other than square] crosssection, rolled on four faces, or of circular cross-section (other than of highspeed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
97. Bars and rods of tool steel, only cold-formed or cold-finished (excl. semifinished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
98. Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or coldfinished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 25% 72285069 Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hotrolled bars and rods in irregularly wound coils)
99. Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished (excl. of circular cross-section and products of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
100. Wire of high-speed steel, in coils (excl. bars and rods)
101. Wire of steel containing by weight 0,9% to 1,1% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, in coils (excl. rolled bars and rods)
102. Wire of alloy steel other than stainless, in coils (excl. rolled bars and rods, wire of high-speed steel or silico-manganese steel and articles of subheading 7229.90.50)
103. Angles, shapes and sections, of iron or steel, welded
104. Precision tubes, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas)
105. Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and precision tubes)
106. Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)
107. Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, with a wall thickness of <= 2 mm 25% 73063019 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, with a wall thickness of > 2 mm
108. Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc
109. Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc)
110. Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
111. Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe")
112. Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe")
113. Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
114. Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
115. Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systems
116. Tube or pipe fittings of non-malleable cast iron (excl. products of a kind used in pressure systems)
117. Tube or pipe fittings of malleable cast iron
118. Cast tube or pipe fittings of steel
119. Doors, windows and their frames and thresholds for doors, of iron or steel
120. Equipment for scaffolding, shuttering, propping or pit-propping (excl. composite sheetpiling products and formwork panels for poured-in-place concrete, which have the characteristics of moulds)
121. Panels comprising two walls of profiled "ribbed" sheet, of iron or steel, with an insulating core
122. Structures and parts of structures, of iron or steel, solely or principally of sheet, n.e.s. (excl. doors and windows and their frames, and panels comprising two walls of profiled "ribbed" sheet, of iron or steel, with an insulating core)
123. Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)
124. Reservoirs, tanks, vats and similar containers, of iron or steel, for gases other than compressed or liquefied gas, of a capacity of > 300 l (excl. containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)
125. Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of > 100.000 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)
126. Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of <= 100.000 l but > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)
127. Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of < 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping)
128. Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of >= 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping)
129. Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >=165bar, of a capacity >=20 l to <=50 l (excl. containers specifically constructed or equipped for one or more types of transport)
130. Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >=165bar, of a capacity >50 l (excl. containers specifically constructed or equipped for one or more types of transport)
131. Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of >= 1.000 l (excl. seamless containers and containers specifically constructed or equipped for one or more types of transport)
132. Woven cloth, incl. endless bands, of stainless steel wire (excl. woven products of metal fibres of a kind used for cladding, lining or similar purposes and endless bands for machinery)
133. Woven cloth, incl. endless bands, of iron or steel wire (excl. stainless and woven products of metal fibres of a kind used for cladding, lining or similar purposes)
134. Grill, netting and fencing, of iron or steel wire, not welded at the intersection (excl. plated or coated with zinc or coated with plastics)
135. Roller chain of iron or steel, of a kind used for cycles and motorcycles
136. Roller chain of iron or steel (excl. roller chain of a kind used for cycles and motorcycles)
137. Articulated link chain of iron or steel (excl. roller chain)
138. Parts of articulated link chain, of iron or steel
139. Chain of iron or steel (excl. articulated link chain, skid chain, stud-link chain, welded link chain and parts thereof; watch chains, necklace chains and the like, cutting and saw chain, skid chain, scraper chain for conveyors, toothed chain for textile machinery and the like, safety devices with chains for securing doors, and measuring chains)
140. Parts of skid chain, stud-link chain and other chains of heading 7315 (excl. articulated link chain)
141. Self-tapping screws, of iron or steel other than stainless (excl. wook screws)
142. Spaced-thread screws of iron or steel other than stainless
143. Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws)
144. Blind rivet nuts of iron or steel other than stainless
145. Self-locking nuts of iron or steel other than stainless
146. Nuts of iron or steel other than stainless, with an inside diameter <= 12 mm (excl. blind rivet nuts and self-locking nuts)
147. Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts)
148. Appliances for baking, frying, grilling and cooking with oven, incl. separate ovens, for domestic use, of iron or steel, for gas fuel or for both gas and other fuels (excl. large cooking appliances)
149. Appliances for baking, frying, grilling and cooking and plate warmers, for domestic use, of iron or steel, for gas fuel or for both gas and other fuels (excl. cooking appliances with oven, separate ovens and large cooking appliances)
150. Air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel
151. Table, kitchen or other household articles, and parts thereof, of stainless steel (excl. cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
152. Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excl. enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the nature of a work implement; cutlery, spoons, ladles etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
153. Sinks and washbasins, of stainless steel
154. Articles of non-malleable cast iron, n.e.s. 25% 73259910 Articles of malleable cast iron, n.e.s. (excl. grinding balls and similar articles for mills)
155. Articles of iron or steel, cast, n.e.s. (excl. of malleable or non-malleable cast iron, grinding balls and similar articles for mills)
156. Ladders and steps, of iron or steel
157. Pallets and similar platforms for handling goods, of iron or steel
158. Reels for cables, piping and the like, of iron or steel
159. Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel
160. Articles of iron or steel, open-die forged, n.e.s.
161. Sintered articles of iron or steel, n.e.s.
162. Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics
163. Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. such products painted, varnished or coated with plastics, and expanded plates, sheets and strip)
164. Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics
165. Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip)
166. Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)
167. Motorcycles, incl. mopeds, with reciprocating internal combustion piston engine of a cylinder capacity > 500 cm³ but <= 800 cm³
168. Motorcycles, incl. mopeds, with reciprocating internal combustion piston engine of a cylinder capacity > 800 cm³
169. Sea-going sailboats and yachts, with or without auxiliary motor, for pleasure or sports
170. Sailboats and yachts, with or without auxiliary motor, for pleasure or sports (excl. seagoing vessels)
171. Sea-going motor boats and motor yachts, for pleasure or sports (other than outboard motor boats)
172. Motor boats for pleasure or sports, of a length <= 7,5 m (other than outboard motor boats)
173. Motor boats for pleasure or sports, of a length > 7,5 m (other than outboard motor boats and excl. seagoing motor boats)
174. Vessels for pleasure or sports, rowing boats and canoes, of a weight <= 100 kg each (excl. motor boats powered other than by outboard motors, sailboats with or without auxiliary motor and inflatable boats)
175. Vessels for pleasure or sports, rowing boats and canoes, of a weight > 100 kg, of a length <= 7,5 m (excl. motor boats powered other than by outboard motors, sailboats with or without auxiliary motor and inflatable boats)
176. Vessels for pleasure or sports , rowing boats and canoes, of a weight > 100 kg, of a length > 7,5 m (excl. motor boats and motor yachts powered other than by outboard motors, sailboats and yachts with or without auxiliary motor and inflatable boats)
177. Playing cards (10% additional duty)